Passer au contenu
Nvixeon Services
Engineering Beyond the Board
Custom STM32 boards, FEA-validated enclosures, and professional 3D printing — engineered in Ghana, shipped worldwide.
What We Do
Four Services. One Engineering Team.
Custom Board Design
Send us your spec. Get full schematics, Altium files, Gerbers, and BOM within 48 hours.
Enclosure Design & Validation
FEA and drop-test simulation before a single part is printed.
3D Printing
Professional FDM printing of standard or custom enclosures, 2–5 business days.
Display Modules — Coming Soon
SPI, RGB, and MIPI-DSI displays that plug directly into Nvixeon board headers.
Custom Board Design
From Spec To Silicon
Have a specific embedded application no off-the-shelf board addresses? We take your requirements from brief to Gerber-ready, and you own everything we produce.
What We Need From You
- MCU choice and peripheral requirements
- Form factor and power budget
- Target production volume
- Any interface or connector constraints
What You Receive
- Full schematics
- Altium Designer project files
- Gerber outputs and BOM
- Assembly drawings
Project Tiers & Turnaround
Simple Board
1–2 layers, under 50 components
GH₵250
Standard Board
4 layers, USB / Ethernet / display
GH₵500
Advanced Board
4–6 layers, high-speed signals
GH₵950
Full Package
BOM optimisation, DFM review, prototype
GH₵1,500
Quote within 48 hours. Full design delivered in 2–4 weeks.
Enclosure Design
Simulated Before Printed
Every enclosure goes through drop-test simulation and FEA before a single part is printed. When the first prototype arrives, it already reflects the findings of structural analysis — not the guesses of a first draft.
Step 1
Board-Fit Modelling
Board dimensions, connector positions, mounting holes, ventilation, and cable management — all modelled from the start.
Step 2
Drop-Test Simulation
Simulated drops at 1m, 1.5m, and 2m. Flat face, edge, and corner impacts. Weaknesses resolved before printing.
Step 3
Finite Element Analysis
Von Mises stress, deformation under load, safety factors, and stress concentrations — all validated before sign-off.
Step 4
Strength Optimisation
Rib patterns, snap-fit geometries, and boss specs refined for maximum stiffness and minimum material use.
Step 5
Material Selection
PLA · PETG · ABS · TPU · ASA — chosen for your environment: indoor, outdoor, UV-exposed, or flexible.
Step 6
Finish Options
Professional FDM printing with standard, smoothed, or painted surface finish options.
Enclosure design and simulation from GH₵150 for standard boards. Complex assemblies quoted individually.
3D Printing
From File To Finished Part
Professional FDM printing for electronics makers, engineers, and product teams. Standard Nvixeon enclosures ready to ship. Custom STL or STEP files printed to order in 2–3 business days.
Standard Enclosures
Simulation-validated housings for every Nvixeon board. Precise port cutouts, multiple colours. Ready to order.
Custom Files
Upload your STL or STEP. Choose material, colour, layer height, and infill. Dispatched in 2–3 business days.
Materials
PLA · PETG · ABS · TPU · ASA
Turnaround
Standard enclosures: 3–5 business days. Custom files: 2–3 days after file review.
Display & Interface Modules — Coming Soon
Plug-In Ready, Out of the Box
These display modules are coming soon and not yet available to order. Every display module plugs directly into Nvixeon board headers. No ribbon cables to hunt down. No level shifters to source. No driver to write from scratch. The connector fits, the driver exists, and the example code runs on first flash.
Display Range
2.8″ SPI TFT through 7″ MIPI-DSI touch panels. Every display interface the STM32 family supports.
Interface Coverage
Designed exclusively for Nvixeon boards. SPI, RGB, MIPI-DSI, and parallel — all interfaces covered.
What's Included
Every module ships with wiring guide, driver source code, and a tested example project.
Get Started
Let's Build Something Together
Send us a brief description of your project. We respond within 24 hours with a recommendation and a quote.
